Hey folks!

In this episode we'll wrap up the Carver's Bench.

With the top out of the,- wedges?... I'll fit the lower boards for the shelf. This shelf is a structural component of the bench as there aren't any lower stretchers along the bench length. I added some notches in the corners of the shelf boards and then they were nailed in place.

After this episode, I flattened the top, mounted the work on the plywood, and then screwed it all together. Between the construction grade lower frame, the reclaimed timber . . .

To view the remaining content please login or register below.

Become An Unplugged Life Member